Fire resistant sealing compound for linear joint and gap seals The new HENSOMASTIK® Acrylic is a ready-for-use acrylic based liquid filler especially designed to form a fire penetration seal in linear joints and gaps where wall and floor constructions made…
The HENSOMASTIK® Acrylic Penetration Seal 2 x 50 mm for Cables (ETA Nr. 23/0318) is a soft seal system comprising two min. 50 mm thick mineral fibre boards ≥ 150 kg/m³ used to form a firestop sealing to reinstate the…
The HENSOTHERM® GM 2000 is a fire-resistant mineral gypsum mortar, consisting of expanded perlite (0-3 mm) and fibres (6-13 mm) used to form a fire penetration seal for single, multiple and mixed services to reinstate the fire resistance performance of…
Intumescent fire protection compound for pipes and cables The intumescent fire protection compound HENSOTHERM® 7 KS viskos is supplied in cartridges and used as an annular gap seal for single penetrations and small fire penetration seals for pipes, cables, cable…
Solvent free 2C fire protection coating system for interior and exterior use Tested according to EN 13381-8 and approved according to EN 13501-2 ETA-21/0475, CE marking in accordance with 93/68/EEC Approved in accordance with BS 476, Certifire No. CF 5994…
Fire protection solution for electrical installation boxes and power sockets In general, fire protection walls must not have any openings, but in practice it is sometimes unavoidable to route electrical supply lines through it or to place electrical installation boxes…
Water-based sealant for penetration seal and linear joint seal HENSOTHERM® Kitt is a water-based, highly flexible, fire resistant fire-protection joint and sealing compound with a fire resistant rate up to 4 hours. For indoor use between solid mineral construction materials…