HENSOTHERM® 7 KS Fugenelement for easy and fast sealing of joints between cellular concrete, concrete, hollow blocks and brickwork for indoor and outdoor applications with a maximum joint width up to 100 mm. Fire resistant rate up to EI 90…
HENSOMASTIK® 5 KS viskos is a water-based, ablative, fire-protection coating for making joint seals up to EI 240 in floors with a joint width from 12 mm up to max. 100 mm. Also be used for making membranes (expansion joints)…
Solvent-based 1C system, maintenance-free, for indoor and outdoor use Tested according to EN 13381-8 and approved according to EN 13501-2 ETA No.: 20/1259, CE marking in accordance with 93/68/EEC Colour: RAL 9002 Main uses Open profiles R30 – R60 for…
HENSOTHERM® V 60 is a thinner and used to adjust the viscosity of the solvent-based fire protection coating HENSOTHERM® 310 KS rapid and to clean the equipment after use. HENSOTHERM® V60
HENSOTHERM® 7 KS Gewebe 125 is used as an intumescent pipe sleeve for non-combustible pipes (metal pipes/coolant pipes) with line insulations in flexible walls, rigid walls and rigid floors in the HENSOMASTIK® Mixed Penetration Seal EI 30 / EI 60…
HENSOTHERM® 7 KS is an intumescent fire-protection coating for use on both metal and plastic surfaces. The coating contains no halogens, APEO, borates, fibres or plasticisers. The coating is non-VOC and thus fulfils the criteria of the LEED credit EQ c4.2. Under…
HENSOMASTIK® 5 KS Farbe and HENSOMASTIK® 5 KS viskos are water-based, ablative, fire-protection coatings to create joint seals to EI 90 in ceilings with a joint width of up to 100 mm max. and membranes to EI 240 in floors…
HENSOTHERM® Spachtel universal is a fire-protection joint and sealing compound (fire-protection acrylic filler) for indoor and outdoor applications for individual pipe and cable systems (LAR); it is also a joint sealing compound between metal and/ or solid mineral construction materials up…
HENSOMASTIK® 5 KS Farbe is an ablative, medium-viscosity and non-hygroscopic, water-based fire-protection coating available as ‘Farbe (paint)’, ‘viskos (viscous)’, and ‘SP (Spachtel (filler))’. It is used for the construction of penetration seals S 90, EI 30 / EI 60 and…
HENSOMASTIK® 5 KS is a water-impermeable fire-protection coating which can be used on horizontal or vertical cables and cable conduits indoors as well as outdoors. HENSOMASTIK® 5 KS reduces the heat exposure through ablation (release of water in a chemical…