Water-based 1C system, maintenance-free, for use in interior spaces and open structures Tested in accordance with DIN EN 13381-8 and approved in accordance with DIN EN 13501-2 ETA No.: 20/1229, CE marking in accordance with 93/68/EEC VKF Brandschutzanwendung No. 24304…
Solvent-based 1C system, maintenance-free, for interior / exterior use Tested according to DIN EN 13381-8 and approved according to DIN EN 13501-2 ETA No.: 20/1230, CE marking in accordance with 93/68/EEC Certificate of applicability abZ No.: Z-200.4-34 VKF Brandschutzanwendung No.…
HENSOGRUND 1K AK is a solvent-based single pack primer based on alkyd resin for structural steel members derusted by hand or blasted. Substrates / Properties Substrates: Steel (Sa 2 ½, St 2) VOC approx 370 g/l Free from zinc phosphate Good penetration…
HENSOGRUND 2K (adhesive primer) is a solvent-based 2-pack primer for HENSOTHERM® fire protection coatings to improve the adhesion on galvanized steel surfaces.
HENSOMASTIK® K 2000 is a flexible special adhesive. It bonds fire-protection boards with additional mechanical fixing, serves as an installation aid when working with insulating materials and assists when bonding and sealing fire-protection boards for the construction of ventilation systems. Its…
In Germany, the penetration seals of fire dampers have been produced using mortar until now. In Austria and the Netherlands, however, the long-preferred method has been to execute them as soft penetration seals and thereby exploit the advantages of a…
HENSOTHERM® 7 KS Gewebe 50 is used as an intumescent pipe wrap for combustible pipes up to a diameter of 125 mm in flexible walls, rigid walls and rigid floors in the HENSOMASTIK® Mixed Penetration Seal EI 90 / EI 120.…
HENSOMASTIK® Mixed Penetration Seal systems are used as penetration seals for metal pipes, combustible pipes and electrical cables, thereby restoring the fire safety of wall and ceiling structures which have openings for supply lines. The HENSOMASTIK® Mixed Penetration Seal EI…
HENSOMASTIK® Mixed Penetration Seal systems are used as penetration seals for metal pipes, flammable pipes and electrical cables, thereby restoring the fire safety of wall and ceiling structures which have openings for supply lines. The HENSOMASTIK® Mixed Penetration Seal EI…
HENSOTHERM® F 2000 is used to produce mixed hard penetration seals S 90 for cables and pipes in solid walls and floors. Applications Rigid walls with a thickness > 17.5 cm Rigid floors with a thickness > 20 cm All types…