Fire protection solution for single pipe penetrations HENSOTHERM® 7 KS Gewebe 50 is designed as an endless pipe collar for sealing single pipe penetrations. It can be used to seal combustible and non-combustible pipes insulated with synthetic rubber in solid…
Flexible cable bandage to form a fire penetration seal for cables and cable support structures according to EN 1366-3 Inside buildings, especially in modern residential and office buildings, a large number of electrical cables run. Many cable sheaths and insulations…
Water-based 1C system, maintenance-free, for indoor use Approved in accordance with BS 476 Certifire No. CF 5678 Main uses Structural steel profiles as columns / beams / girders / I- / H-sections Open steel profiles: R15 – R60 for beams…
Fire protection solution for single pipe penetrations HENSOTHERM® 7 KS Gewebe 50 is designed as an endless pipe collar for sealing single pipe penetrations. It can be used to seal combustible and non-combustible pipes insulated with synthetic rubber in solid…
HENSOTHERM® 7 KS Gewebe 125 is used as an intumescent pipe sleeve for non-combustible pipes (metal pipes/coolant pipes) with line insulations in flexible walls, rigid walls and rigid floors in the HENSOMASTIK® Mixed Penetration Seal EI 30 / EI 60…
HENSOTOP 84 AF is a solvent-based single component, fast-drying, transparent and free from aromatic substances top coat for HENSOTHERM® 1 KS INNEN fire protection coating for wood in indoor use. HENSOTOP 84 AF must be applied, after through-drying of HENSOTHERM®…
Water-based 1C system, maintenance-free, for interior use Approved in accordance with BS 476 Certifire No. CF 5344 Main uses Open sections and closed hollow sections R15 – R180 Environment Contains no halogens, APEO, borates or plasticisers Non-VOC, LEED v4 Environmental product declaration…
Water-based 1C system, maintenance-free, for indoor use Tested in accordance with DIN EN 13381-8 and approved in accordance with DIN EN 13501-2 ETA No.: 20/1228, CE marking in accordance with 93/68/EEC VKF Brandschutzanwendung No. 27733 Main uses Standard steel profiles R30/60/90/120…
Water-based 1C system, maintenance-free, for use in interior spaces and open structures Tested in accordance with DIN EN 13381-8 and approved in accordance with DIN EN 13501-2 ETA No.: 20/1229, CE marking in accordance with 93/68/EEC VKF Brandschutzanwendung No. 24304…
HENSOTHERM® F 2000 is used to produce mixed hard penetration seals S 90 for cables and pipes in solid walls and floors. Applications Rigid walls with a thickness > 17.5 cm Rigid floors with a thickness > 20 cm All types…