HENSOGRUND 1966 E+ is a solvent-based single pack primer based on alkyd resin for structural steel members derusted by hand or blasted. Substrates / Properties Substrates: Steel (Sa 2 ½, St 2) VOC approx 370 g/l Free from zinc phosphate Good penetration on steel…
HENSOTHERM® 7 KS is an intumescent fire-protection coating for use on both metal and plastic surfaces. The coating contains no halogens, APEO, borates, fibres or plasticisers. The coating is non-VOC and thus fulfils the criteria of the LEED credit EQ…
Fire protection solution for single pipe penetrations HENSOTHERM® 7 KS Gewebe 50 is designed as an endless pipe collar for sealing single pipe penetrations. It can be used to seal combustible and non-combustible pipes insulated with synthetic rubber in solid…
Water-based sealant for penetration seals and fire-resistant edge, wall and ceiling joints The HENSOMASTIK® Acrylic is a flexible white acrylic penetrations sealant with ablative fillers, especially formulated to provide excellent fire resistance and fire-resistant edge, wall and ceiling joints and…
HENSOGRUND WB Green water based, single pack acrylic primer for structural steel members derusted by hand, galvanised or blasted and for stainless steel surfaces. Substrates / Properties Substrates: Steel (Sa 2 1/2 , St 3, PSt 3), galvanised steel, stainless steel…
HENSOTHERM® V 55 is a cleaning thinner for the 2C fire protection coating HENSOTHERM® 920 KS. It is used for pre-cleaning and intermediate cleaning in case of a longer work interruption as well as for cleaning the equipment and working…
Fire protection solution for single pipe penetrations HENSOTHERM® 7 KS Gewebe 50 is designed as an endless pipe collar for sealing single pipe penetrations. It can be used to seal combustible and non-combustible pipes insulated with synthetic rubber in solid…
Solvent-based 1C system, maintenance-free, for indoor and outdoor use Tested according to EN 13381-8 and approved according to EN 13501-2 ETA No.: 20/1259, CE marking in accordance with 93/68/EEC Colour: RAL 9002 Main uses Open profiles R30 – R60 for…
HENSOTHERM® V 60 is a thinner and used to adjust the viscosity of the solvent-based fire protection coating HENSOTHERM® 310 KS rapid and to clean the equipment after use. HENSOTHERM® V60
HENSOTHERM® 7 KS Gewebe 125 is used as an intumescent pipe sleeve for non-combustible pipes (metal pipes/coolant pipes) with line insulations in flexible walls, rigid walls and rigid floors in the HENSOMASTIK® Mixed Penetration Seal EI 30 / EI 60…