HENSOGRUND WB Green water based, single pack acrylic primer for structural steel members derusted by hand, galvanised or blasted and for stainless steel surfaces. Substrates / Properties Substrates: Steel (Sa 2 1/2 , St 3, PSt 3), galvanised steel, stainless steel…
Water-based 1K system, maintenance-free, for indoor use Approved in accordance with BS 476 Certifire No. CF 5678 Main uses Structural steel profiles as columns / beams / girders / I- / H-sections Open steel profiles: R15 – R60 for beams…
Fire-sealing solutions for shaft walls in drywall and solid construction The HENSOTHERM® System for Shaft Wall (ETA No. 20/1307) offers cost-effective and reliable fire protection solutions for the fire-stop sealing of combustible, non-combustible, and aluminium composite pipes with PE or…
Fire protection solution for single pipe penetrations HENSOTHERM® 7 KS Gewebe 50 is designed as an endless pipe collar for sealing single pipe penetrations. It can be used to seal combustible and non-combustible pipes insulated with synthetic rubber in solid…
HENSOMASTIK® 5 KS viskos is a water-based, ablative, fire-protection coating for making joint seals up to EI 240 in floors with a joint width from 12 mm up to max. 100 mm. Also be used for making membranes (expansion joints)…
Solvent-based 1K system, maintenance-free, for indoor and outdoor use Tested according to EN 13381-8 and approved according to EN 13501-2 ETA No.: 20/1259, CE marking in accordance with 93/68/EEC Colour: RAL 9002 Main uses Open profiles R30 – R60 for…
HENSOTHERM® V 60 is a thinner and used to adjust the viscosity of the solvent-based fire protection coating HENSOTHERM® 310 KS rapid and to clean the equipment after use. HENSOTHERM® V60
HENSOTHERM® 7 KS Gewebe 125 is used as an intumescent pipe sleeve for non-combustible pipes (metal pipes/coolant pipes) with line insulations in flexible walls, rigid walls and rigid floors in the HENSOMASTIK® Mixed Penetration Seal EI 30 / EI 60…
HENSOTHERM® 7 KS is an intumescent fire-protection coating for use on both metal and plastic surfaces. The coating contains no halogens, APEO, borates, fibres or plasticisers. The coating is non-VOC and thus fulfils the criteria of the LEED credit EQ c4.2. Under…
HENSOMASTIK® 5 KS Farbe and HENSOMASTIK® 5 KS viskos are water-based, ablative, fire-protection coatings to create joint seals to EI 90 in ceilings with a joint width of up to 100 mm max. and membranes to EI 240 in floors…
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Turnstile. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information