Intumescent fire protection compound for pipes and cables The intumescent fire protection compound HENSOTHERM® 7 KS viskos is supplied in cartridges and used as an annular gap seal for single penetrations and small fire penetration seals for pipes, cables, cable…
Ready-to-use fire penetration seal for cables and combustible pipes Inside buildings, especially in modern residential and office buildings, a large number of electrical cables run. The HENSOTHERM® Service Transit is an easy to install pre-assembled fire penetration seal solution consisting…
Flexible cable bandage to form a fire penetration seal for cables and cable support structures according to EN 1366-3 Inside buildings, especially in modern residential and office buildings, a large number of electrical cables run. Many cable sheaths and insulations…
Water-based sealant for penetration seals and fire-resistant edge, wall and ceiling joints The HENSOMASTIK® Acrylic is a flexible white acrylic penetrations sealant with ablative fillers, especially formulated to provide excellent fire resistance and fire-resistant edge, wall and ceiling joints and…
Solvent free 2K fire protection coating system for interior and exterior use Tested according to EN 13381-8 and approved according to EN 13501-2 ETA-21/0475, CE marking in accordance with 93/68/EEC ETA-assessed intended working life of more than 50 years, in…
Fire protection solution for electrical installation boxes and power sockets In general, fire protection walls must not have any openings, but in practice it is sometimes unavoidable to route electrical supply lines through it or to place electrical installation boxes…
The HENSOTHERM® M 2000 mortar fire penetration seal is a mixed penetration seal system made from the A1 fire protection mortar HENSOTHERM® M 2000 suitable for cable and pipe penetrations in walls and floors. HENSOTHERM® M 2000 is used as…
Pattress system as a cable seal (penetration seal) in solid walls and solid floors The HENSOMASTIK® 5 KS Vorschott system is used as a one-sided penetration sealing for electrical cables (cables, cable bundles) to reconstruct the fire safety of solid…
HENSOTOP WB Green is a single component water-based top coat for HENSOTHERM® water-based fire protection coatings for indoor use. Substrates / Properties VOC 3,5 g/m² | nominal stratum thickness acc. to Technical Data Sheet Fast drying coating based on water-based…
Fire protection collar for single pipe lead-throughs in walls and floors The HENSOTHERM® RM 30 / RM 50 / RM 100 fire protection collar is designed as a pipe seal to reinstate the fire safety of solid wall and floor…
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Turnstile. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information