HENSOTOP 2K PU is a solvent-based, fast drying, 2-pack top coat based on polyester for HENSOTHERM® fire protection coatings on steel members for indoor and outdoor use. HENSOTOP 2K PU will be applied due to optical reasons and provides protection…
HENSOTOP SB is a solvent-based single component, halogen-free and fast-drying top coat for HENSOTHERM® fire protection coatings for indoor and outdoor use. HENSOTOP SB will be applied on HENSOTHERM® fire protection coatings due to optical reasons and provides protection from moisture…
HENSOTHERM® V 45 is a thinner and used to adjust the viscosity of the fire protection products HENSOGRUND 1966 E+, HENSOGRUND 1K AK, HENSOTHERM® 310 KS, and HENSOTOP SB as well as to clean the equipment after use. HENSOTHERM®…
Water-based 1K system, maintenance-free, for indoor use Tested in accordance with DIN EN 13381-8 and approved in accordance with DIN EN 13501-2 ETA No.: 20/1228, CE marking in accordance with 93/68/EEC VKF Brandschutzanwendung No. 27733 Main uses Standard steel profiles R30/60/90/120…
Water-based 1K system, maintenance-free, for use in interior spaces and open structures Tested in accordance with DIN EN 13381-8 and approved in accordance with DIN EN 13501-2 ETA No.: 20/1229, CE marking in accordance with 93/68/EEC VKF Brandschutzanwendung No. 24304…
Solvent-based 1K system, maintenance-free, for interior / exterior use Tested according to DIN EN 13381-8 and approved according to DIN EN 13501-2 ETA No.: 20/1230, CE marking in accordance with 93/68/EEC Certificate of applicability abZ No.: Z-200.4-34 VKF Brandschutzanwendung No.…
HENSOGRUND 1K AK is a solvent-based single pack primer based on alkyd resin for structural steel members derusted by hand or blasted. Substrates / Properties Substrates: Steel (Sa 2 ½, St 2) VOC approx 370 g/l Free from zinc phosphate Good penetration…
HENSOGRUND 2K (adhesive primer) is a solvent-based 2-pack primer for HENSOTHERM® fire protection coatings to improve the adhesion on galvanized steel surfaces.
HENSOMASTIK® K 2000 is a flexible special adhesive. It bonds fire-protection boards with additional mechanical fixing, serves as an installation aid when working with insulating materials and assists when bonding and sealing fire-protection boards for the construction of ventilation systems. Its…
In Germany, the penetration seals of fire dampers have been produced using mortar until now. In Austria and the Netherlands, however, the long-preferred method has been to execute them as soft penetration seals and thereby exploit the advantages of a…
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Turnstile. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information