skip to Main Content
Miqua

HENSOTHERM® 2C fire protection system for steel

The HENSOTHERM® 2C fire protection systems consisting of HENSOTHERM® 910 KS and the newly-formulated HENSOTHERM® 920 KS are 100% solvent-free, two-component epoxy fire protection coatings for strengthening steel profiles and steel structures both indoors and outdoors. The systems impress with their fire resistance times of 30/60/90/120 minutes, the beneficial working properties such as the optimally-adjusted, longer shelf life, the thin layer thicknesses and an achievable corrosivity category of up to C5 High in the system. They can also be used on galvanised components. Bearing in mind the expected environmental requirements, some of the fire protection coatings can also be used without primer and topcoat.

Quickly coated, loaded and assembled
HENSOTHERM® 2C fire protection systems are applied in the workshop and are already optimally protected against mechanical stress and the weather after 24 hours drying time. This means that steel elements that have already been coated can be stored outdoors and/or transported directly to the site of use and installed there so as to save time.

Further information about HENSOTHERM® 2C fire protection systems

>> Product system HENSOTHERM® 910 KS

>> Product system HENSOTHERM® 920 KS

Opens new window on vimeo.com

HENSOTHERM® 2C fire protection systems
HENSOTHERM® 2C fire protection systems are applied in the workshop and are already protected against mechanical stress and the weather after 24 hours drying time. This means that transport to the site is possible at short notice, so that it can be installed there directly and without losing time.

>> Reference Jewish Museum „MiQua“ | Cologne

Contact

Technical support / Sales
Tel: +49 40 721062-48
Fax: +49 40 721062-52
Send email

Back To Top